Nine categories

Custom silicone & PVC products

All nine run on the same 1,800 m² plant in Dongguan, on the same QC process, with the same 100 pcs trial minimum. None is a side line. Pick the category closest to what you are making — each page carries its own specification table and lead time.

Branding & gifts

Flat or small parts that carry a logo — the fastest categories to sample and the lowest barrier to a first order.

Silicone Labels & Patches We mould custom silicone labels and 3D patches from 100 pieces, with raised or debossed logos, Pantone-matched colour and a backing that suits how you attach them — sew channel, heat-transfer film or adhesive.. MOQ 100 pcs · Sampling 3–7 days Charms & Keyrings Silicone keychains and charms from 100 pieces, moulded in 2D or 3D with Pantone-matched colour, and finished with a split ring, lobster clasp or ball chain. MOQ 100 pcs · 2D or 3D Character Sleeves We mould one-piece silicone sleeves that are both a character and a functional case — a raised character relief on the outside, a precise cavity for your device on the inside, and an optional keyring hole so it doubles as a charm.. One-piece moulded · Shore A 20–60

Figures & IP

Sculpted parts where the shape is the product. These need a 3D step before tooling.

Silicone Figures Silicone figures from 100 pieces, in any hardness from a soft squishy toy (Shore A 10) to a firm collectible (Shore A 60), with colour moulded in or pad-printed into recesses.. MOQ 100 pcs · Shore A 10–60 Silicone IP Characters We turn a 2D character or brand mascot into a moulded silicone figure. NDA before artwork · 2D → 3D modelling PVC & Soft Vinyl Figures Two different processes sit under the word "PVC figure": solid injection moulding, which gives sharp edges and tight multi-colour detail, and hollow rotocasting — sofubi — which gives a light, squeezable toy. Solid PVC or rotocast · MOQ 500–3,000

Functional parts

Parts where an engineering number matters more than appearance — hardness, IP rating, compression set.

Silicone Keypads & Buttons We mould silicone keypads with a defined tactile snap, carbon-pill or metal-dome contacts, and a cycle life of 1–5 million presses depending on the dome design. MOQ 500 pcs · 1–5M cycles Silicone Seals & Gaskets Silicone seals, gaskets and O-rings rated from −40 °C to 230 °C, made by compression moulding, extrusion or die-cutting depending on the shape. −40 to 230 °C · Moulded / extruded / die-cut Waterproof Accessories Waterproof pouches and cases rated IPX8 to 3 metres, in TPU or PVC with a silicone or welded seal. IPX8 / 3 m depth · TPU or PVC

How to pick between them

If the part is flat and carries a logo, start with labels or charms. If it has to fit a device, it is a sleeve. If it has to seal something, it is a gasket — and the engineering question changes from appearance to compression set.

If the shape is the product — a character, a mascot, a collectible — you need a 3D step before tooling, and that step is where most projects lose a week. Send a front, side and back view and we will tell you what is missing.

Still unsure? Silicone vs PVC explains which material fits which use case, and a short message is usually faster than reading.

Send your spec, get a quote

Tell us what you need and how many. within 1 business day (GMT+8) — usually much sooner. If you already have a drawing or 3D file, attach it and skip the back-and-forth.