Custom Silicone Charms & Keyrings — Low MOQ Promotional
Silicone keychains and charms from 100 pieces, moulded in 2D or 3D with Pantone-matched colour, and finished with a split ring, lobster clasp or ball chain. This is our lowest-barrier product — no minimum tooling spend beyond a one-time mould.
- MOQ 100 pcs
- 2D or 3D
- Pantone matched
- Metal ring / lobster clasp
| Material | HCR silicone, compression moulded PVC option for sharper multi-colour detail |
|---|---|
| Size range | 25–60 mm, tolerance ±0.1 mm |
| Relief | 2D flat / 3D raised up to 3 mm |
| Hardware | Split ring · lobster clasp · ball chain · key ring with swivel |
| Colour | Pantone matched, up to 4 colours |
| Sides | Single or double sided |
| MOQ | 100 pcs (trial) / 500 pcs (standard) |
| Sampling | 3–7 days sample fee refundable on order |
| Lead time | 15–20 days after sample approval |
| Testing | Third-party (SGS / Intertek / BV) arranged per order |
| Packing | Polybag, or individual OPP bag with backing card |
Values marked on request depend on your drawing. Send it and we will confirm in writing.
Can we make yours?
- Charms and keyrings 25–60 mm, 2D or 3D
- Pantone colour matching, up to 4 colours
- Split ring, lobster clasp, ball chain hardware
- Individual polybag or backing-card packing
- 100–100,000 pcs per order
Where we stop
- Hard plastic injection moulding (ABS / PC structural parts)
- Metal machining, stamping or plating
- Factory-level certificates — we arrange third-party testing per order instead
Process and material
Silicone or PVC — pick by detail
Soft PVC gives sharper edges and finer multi-colour detail, which is why most 2D anime keychains are PVC. Silicone wins on heat resistance, skin contact and stretch. If your artwork has thin lines or more than four colours, PVC is the honest recommendation.
Moulding and finishing
Charms are compression moulded in a CNC-engraved steel mould, then deflashed by hand. The attachment hole is moulded in, not drilled, so it will not tear out under load.
Post-curing
Everything is post-cured at 200 °C for 2 hours so the piece does not smell when the end user opens the bag — a real issue for promotional runs that sit in storage.
What we have moulded
Seasonal and generic characters from our own moulds — shown here because the artwork is ours or in the public domain. Shape, strap printing, plating and packing are all variables we change per order.
Client-commissioned character work is covered by an NDA and is shared only on request — read how we handle licensed artwork.
Questions buyers ask about charms & keyrings
What is the lowest quantity you will run?
100 pcs. The one-time mould cost is what makes small runs uneconomic elsewhere; we keep that cost low by engraving the tool in-house.
Silicone or PVC for my design?
PVC for fine lines and more than four colours; silicone for heat, skin contact and stretch. Send the artwork and we will tell you which one will actually look right.
Can I get a sample before ordering?
Yes. Sampling takes 3–7 days and the sample fee is credited against your production order.
How do you attach the ring?
The hole is moulded into the body during compression, not drilled afterwards, so the silicone around it stays intact and does not tear under pull force.
Can you pack them individually?
Yes — polybag, OPP bag with a printed backing card, or a branded header card. Tell us the retail channel and we will propose a packing format.
The spec table above, the tolerance notes, and the list of what we need from you — as a two-page PDF you can forward to your team.
Related products
Not sure which material fits your project? How to choose a silicone manufacturer — 12 questions →
Send your spec, get a quote
Tell us what you need and how many. within 1 business day (GMT+8) — usually much sooner. If you already have a drawing or 3D file, attach it and skip the back-and-forth.
- Email [email protected]
- Phone +86-755-21011840
- WhatsApp +852 5161 2090